lock plus

Nu Coil II Fin and Coil Cleaner & Degreaser

$37.88 - $141.28

North Woods® Nu-Coil II is an non-acid, alkaline based coil cleaner and brightener. Nu-Coil II biodegradable surfactants and detergents produce high foam that helps penetrate and lift dirt from deep within the coil bank. Its formulation is a miraculous cleaner that renews the efficiency and appearance of air conditioning and refrigeration equipment of all sizes and types. Nu-Coil II cleans, brightens, and renovates coils, fins, filters, condensers, electronic precipitators, fan blades, squirrel cages, etc.

Nu Coil II Uses/Benefits:

  • Removes:
    • Corrosion, white rust, tarnish, atmospheric salts, oily soil, lime, dirt, soot, lint, grass shavings, etc.
  • High foaming with quick penetrating surfactant system

Directions for Use:

A dilution of 1 cleaner to 3 parts water is general sufficient to maintain unit in like new condition.

Dwell time depends on build up of soil and how long it has been allowed to accumulate. Spray in a coarse stream (never a mist) on fins, coils, and other areas to be cleaned. Allow a few minutes for cleaner to penetrate, then rinse thoroughly with clean water.

Note: Use with plastic pumps, brackets, etc. Rinse cleaning equipment after use.

Additional Product Information: 

Read more
Select Product Size required
Current stock 0

Description

North Woods® Nu-Coil II is an non-acid, alkaline based coil cleaner and brightener. Nu-Coil II biodegradable surfactants and detergents produce high foam that helps penetrate and lift dirt from deep within the coil bank. Its formulation is a miraculous cleaner that renews the efficiency and appearance of air conditioning and refrigeration equipment of all sizes and types. Nu-Coil II cleans, brightens, and renovates coils, fins, filters, condensers, electronic precipitators, fan blades, squirrel cages, etc.

Nu Coil II Uses/Benefits:

  • Removes:
    • Corrosion, white rust, tarnish, atmospheric salts, oily soil, lime, dirt, soot, lint, grass shavings, etc.
  • High foaming with quick penetrating surfactant system

Directions for Use:

A dilution of 1 cleaner to 3 parts water is general sufficient to maintain unit in like new condition.

Dwell time depends on build up of soil and how long it has been allowed to accumulate. Spray in a coarse stream (never a mist) on fins, coils, and other areas to be cleaned. Allow a few minutes for cleaner to penetrate, then rinse thoroughly with clean water.

Note: Use with plastic pumps, brackets, etc. Rinse cleaning equipment after use.

Additional Product Information: 

Reviews (0)

Be the first to write a review