lock plus

Power Scrub Floor Cleaner

$82.59

North Woods® Power Scrub is the ultimate floor cleaning conditioner. Power Scrub has a great fragrance, proprietary low foaming formulation that will quickly deep clean floor removing the finest layer of finish, dirt, impurities, and floor finish destroying particles. This conditioner enhances the bond between new and old layers of finish promoting much greater film compatibility.  

Power Scrub Uses/Benefits:

  • Non-foaming, Residue-free
  • Removes “dead” top finish layer, dirt, and floor impurities
  • No phosphates, butyl, glycol, caustics, or other solvents

Directions for Use:

For Recoat Preparation:

Automatic Scrubbers: Always fill solution tank with appropriate amount of water first, then add Power Scrub to equal 8.5 oz. per gallon of water.

Mop and Bucket Cleaning: Dilute Power Scrub 8.5 oz. per gallon of water. To maximize cleaning results, apply diluted solution onto intended surface and allow product to “work” 1-3 minutes. Agitate, and pick up. When removed properly no rinsing is required - visually check floor before proceeding. If floor condition is unsatisfactory additional scrubbing or stripping may be required.

For Non-wax floor cleaning dilute as follows with water:

Light Soil - 2 oz. per gallon
Medium Soil - 4 oz. per gallon
Heavy Soil - 8 to 13 oz. per gallon
Extra Heavy Soil - 26 oz. per gallon

 

Read more
Select Product Size required
Current stock 0

Description

North Woods® Power Scrub is the ultimate floor cleaning conditioner. Power Scrub has a great fragrance, proprietary low foaming formulation that will quickly deep clean floor removing the finest layer of finish, dirt, impurities, and floor finish destroying particles. This conditioner enhances the bond between new and old layers of finish promoting much greater film compatibility.  

Power Scrub Uses/Benefits:

  • Non-foaming, Residue-free
  • Removes “dead” top finish layer, dirt, and floor impurities
  • No phosphates, butyl, glycol, caustics, or other solvents

Directions for Use:

For Recoat Preparation:

Automatic Scrubbers: Always fill solution tank with appropriate amount of water first, then add Power Scrub to equal 8.5 oz. per gallon of water.

Mop and Bucket Cleaning: Dilute Power Scrub 8.5 oz. per gallon of water. To maximize cleaning results, apply diluted solution onto intended surface and allow product to “work” 1-3 minutes. Agitate, and pick up. When removed properly no rinsing is required - visually check floor before proceeding. If floor condition is unsatisfactory additional scrubbing or stripping may be required.

For Non-wax floor cleaning dilute as follows with water:

Light Soil - 2 oz. per gallon
Medium Soil - 4 oz. per gallon
Heavy Soil - 8 to 13 oz. per gallon
Extra Heavy Soil - 26 oz. per gallon

 

Reviews (0)

Be the first to write a review